A, drilling tool class 1, straight, taper shank twist drill (50) from 0.5 ~ 2, straight and taper shank core drill (50) from 4 to 3, straight, long taper shank twist drill (50) from 1.5 to 4, the set of type reaming drill (52) from 25 ~ 5, straight and taper shank with carbide twist drill (50) from 5 ~ 6, straight and taper shank taper economic drill (8 ~ phi phi 80) 7, type a whole grinding spiral groove center drill (from 1 to 6) 8, 4 blade step drill (50) from 6 to 9, four blade dimpling drill (16 ~ phi phi 26) clamp factory use (system) 10, two step drill blade (from 2 to 30)
Second, reaming tool class
1, close, completely hand reamer (from 2 to 50) 1:50 taper pin 2, hand long blade reamer (50) from 4 to 3, straight, taper shank machine reamer (50) from 1.5 ~ 4, set of chucking reamer (from 25-100) 5, straight, taper shank carbide tipped machine reamer (40) from 6 to 6, 7, hand valve seat reamer 1:50 taper pin reamer (from 3 ~ 50) 8, spiral reamer
Class three, milling tools
1, straight and taper shank end mill (from 2 to 50) 2, convex and concave round cutter (r1 ~ the r20) 3, straight vertical milling cutter, taper shank length blade (phi phi 4 ~ 50) 4, semicircular keyway milling cutter (from 1.5 to 8) 5, straight, taper shank keyway milling cutter (50) from 2 ~ 6, t-slot milling cutter (36) from 5 ~ 7, straight teeth side and face milling cutter (from 50 to 160) 8, cylindrical milling cutter (40 ~ phi phi 100) 9, wrong tooth side and face milling cutter (from 63 ~ 63) 10, saw blade milling cutter (from 60 ~ 200) 11, symmetrical double Angle cutter (from 50 to 160), 12, 13, single Angle cutter, taper end mill (35 - phi phi 80) 14, helical end milling cutter
Four, thread cutting tools
1, 2, machine tap, hand tap 3, grinding spiral tap, 4, and 5 round die, thread rolling dies, thread rolling plate 7 and 6 tapered pipe thread taps (column) 8, tapered pipe thread die (column)
Five, the measuring tool class
1, 2, smooth limit gauge, thread plug gauge, ring gauge 3, wafer shape gauge 4, groove width 5, smooth plug gauge, plug gauge, ring gauge 6, double-sided gauge length
Sixth, turning and broaching dao classes
Article 1 tool bar, square, rectangle tool 2 3, turning tool, round broach 4 5, round knife
Seven, non-standard cutting class
1, parabolic trough type deep hole drill - straight, long taper shank drill, diameter: from 1 mm ~ 80 mm in overall length: 100 mm ~ 2000 mm, among them, the diameter, blade length, overall length can be according to the required production. 2, all kinds of advanced composite cutting tools, ladder drill, drill, reamer, composite reaming drilling, composite reamer, etc. 3, all kinds of high speed steel, high cobalt steel non-standard measuring tool, cutting tool, tool production according to drawing.
Eight, woodworking cutting tools
All kinds of drill bits, used in milling cutter series, refers to meet dao BanDao series, the doors series, series and so on.