Different kinds of hardware tools, be sure to find out in the production of the product material, to produce is high quality and cheap accessories tools. Allen wrench, for example, often use 45 # medium carbon steel material as raw material, can make a wrench price more popular, for more customers to choose from.

Brand/fairly standard ISO/physical and mechanical properties (min) : the bending strength of N/was; Hardness of HRA/use

1, YG3x/K01/1420; 92.5 / suitable for cast iron. Non-ferrous metal and alloy. Hardened steel alloy steel small cutting of high speed finish machining.

2, YG6 / K20/1900; 90.5 / suitable for cast iron. Non-ferrous metal and alloy. Nonmetallic material medium to the lower finishing and finishing cutting speed.

3, YG6x/K15/1800; 92.0 / suitable for chilled cast iron. Nodular cast iron. Gray cast iron. The small and medium-sized cut cut section of heat-resistant alloy steel high speed finish machining. Semi-finishing.

4, YG6A/k10/19 dated 1800. 92.0 / suitable for chilled cast iron. Nodular cast iron. Gray cast iron. Heat resistant alloy cutting section of the small and medium-sized high speed finish machining

5 and YG8 / K30/2200; 90.0 / suitable for cast iron. Non-ferrous metal and alloy. Low-speed rough machining non-metallic materials.

6, YG8N/K30/2100; 90.5 / suitable for cast iron. White cast iron. Nodular cast iron and chromium, nickel alloy material such as stainless steel of high speed cutting.

7, YG15 / K40/2500; 87.0 / suitable for embedded system of oil Wells. Coal mining bits. Geologic prospecting, drilling bit.

8, YG4C / 1600; 89.5 / suitable for embedded system of oil Wells. Coal mining bits. Geologic prospecting, drilling bit.

9, YG8C / 1800; 88.5 / suitable for embedded system of oil Wells. Mining drill a word. Ten words a bit. Rock drill teeth. DTH drill teeth.

10, YG11C / 2200; 87.0 / suitable for embedded system of oil Wells. Mining drill a word. A bit. Rock drill teeth. DTH drill teeth.

11, YW1 / M10/1400; 92.0 / suitable for steel. Heat resistant steel. Medium-speed semi-finishing of high manganese steel and cast iron.

12, YW2 / M20/1600; 91.0 / suitable for heat resistant steel. High manganese steel. Stainless steel and other hard processing of steel. Roughing and semi-finishing at low speed.

13, GE1 / (/ 2000; 91.0 / suitable for low-speed rough machining of non-metallic materials and clock and watch gear abrasion resistance parts.

14 and GE2/2500; The unique material of 90.0 / for cemented carbide anvil.

15, GE3 / M40/2600; 90.0 / micro drill is suitable for manufacturing fine diameter. Vertical milling cutter. Rotating sharp knife, etc.

16, GE4/2600; 88.0 / needle is suitable for printing. Pressure cylinder tube and special purpose. Great. Belt, etc.

17, GE5/2800; 85.0 / suitable for roll. Impact resistant materials such as cold punching die.