Prevent turning the job injury, the operator should do the following:
(1) wear tight protective clothing, do not open the cuffs, long hair should wear protective cap, can not wear gloves during the operation.
(2) loading spindle chuck To conduct after the shutdown, not the power of the motor by means of the removal of the chuck.
(3) holding the workpiece chuck, dial, heart-shaped clip protruding parts to use shields to avoid strangulation live clothing or other parts of the body; if there is no protective cover, the operation should pay strict attention to the safety distance.
(4) When the workpiece clamping with top pay attention to exactly the same top with the center hole, can not use damaged or skew the top. Before use should be the top center hole wipe clean after tailstock To top prison.
(5) should be used in the center of the workpiece turning slender frame or with the knife, grow lathe part due flag.
(6) Turning irregularly shaped workpieces should be loaded weights and want to start cutting in the trial balance and then turn.
(7) to firmly clamping the tool, the tip protruding portion do not exceed 1.5 times the height of the blade, the shape of sword spacer, the shape and dimensions of the tool body should, consistent with the size of the gasket should be as small and flat .
(8) should be used to hook the timely removal of cutting down a spiral strip crumbs and debris, should hand straight out. To prevent chips wounding. Baffle should be installed in a suitable location.
(9) In addition to the lathe is equipped with automatic measuring gage operation, shall stop the measurement of the workpiece, tool rest and move a safe location.
(10) when sanding with emery cloth workpiece, the tool should move to a safe location and be careful not to let the hands and clothing contact with the workpiece surface.
(11) when grinding the hole, not with your fingers support emery cloth, should be used instead of a stick, but not too fast speed.
(12) prohibits the tools, fixtures or workpiece in a lathe or on the spindle gearbox